Nighthawk Pro 280

t2boats
Still learning

Craig

Posts: 212

Nighthawk Pro 280 Mar 28, 2018 21:51:41 GMT via mobile Zannu and spents like this

Quote

Post by t2boats on Mar 28, 2018 21:51:41 GMT

Yayyy it turned up this morning, really quick delivery! Quality I think is great, carbon fibre all over the place. Very sturdy! From the pix you can see that everything comes with this drone, just needs radio gear and a lipo of your choice. The props are good, very strong indeed, hardly any flex at all. Looking forward to fitting the radio gear and try set things up. I’ve found a few useful videos on YouTube which’ll help no end! Hoping there’s a cable inside the goodie bag which suits my foxeer 2 camera... this was seriously cheap aswell, £17.10p it worked out, then delivery, £21 in all!

Last Edit: Mar 28, 2018 21:57:42 GMT by t2boats

Zannu The Boss Finally home from uni, now to enjoy a great summer Posts: 5,052	Nighthawk Pro 280 Mar 29, 2018 6:38:18 GMT t2boats likes this Quote Select Post Deselect Post Link to Post Back to Top Post by Zannu on Mar 29, 2018 6:38:18 GMT Very nice, at this rate it won't be long everyone on here has persuaded me to spend more of my money on things like this quad. I think you got a good bargain there, but you will only know once you have flown it a few times.
	I am a mad RC loving lawn mower racing lunatic with a desire for over-powered RC's.

t2boats Still learning Craig Posts: 212	Nighthawk Pro 280 Mar 29, 2018 7:15:57 GMT via mobile Zannu likes this Quote Select Post Deselect Post Link to Post Back to Top Post by t2boats on Mar 29, 2018 7:15:57 GMT I’ve no doubts of the ability of this quad, it’s my ability I’m worried about, ha!

DX4S New Member Posts: 33	Nighthawk Pro 280 Mar 29, 2018 7:20:32 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by DX4S on Mar 29, 2018 7:20:32 GMT Where did you buy it from ?.

t2boats Still learning Craig Posts: 212	Nighthawk Pro 280 Mar 30, 2018 7:19:16 GMT via mobile Quote Select Post Deselect Post Link to Post Back to Top Post by t2boats on Mar 30, 2018 7:19:16 GMT Mar 29, 2018 7:20:32 GMT DX4S said: Where did you buy it from ?. It’s from Make It Build It, just checked for you and it out of stock unfortunately. There’s a 250 kit for just £35...

DX4S
New Member

Posts: 33

Nighthawk Pro 280 Mar 30, 2018 8:36:25 GMT

Quote

Post by DX4S on Mar 30, 2018 8:36:25 GMT

Mar 30, 2018 7:19:16 GMT t2boats said:

Mar 29, 2018 7:20:32 GMT DX4S said:

Where did you buy it from ?.

It’s from Make It Build It, just checked for you and it out of stock unfortunately. There’s a 250 kit for just £35...

Ok thanks for the info , just had a look on the site , I was looking for spares at that price you payed for the lads 280 ..

Zannu
The Boss

Finally home from uni, now to enjoy a great summer

Posts: 5,052

Nighthawk Pro 280 Mar 30, 2018 9:11:37 GMT

Quote

Post by Zannu on Mar 30, 2018 9:11:37 GMT

Mar 30, 2018 7:19:16 GMT t2boats said:

Mar 29, 2018 7:20:32 GMT DX4S said:

Where did you buy it from ?.

It’s from Make It Build It, just checked for you and it out of stock unfortunately. There’s a 250 kit for just £35...

What do you need to make them fly then? I might just have to go for one, get into a side of RC I have not yet touched. At £35 it is very tempting. Do you know what postage costs are like from there.

I am a mad RC loving lawn mower racing lunatic with a desire for over-powered RC's.

t2boats Still learning Craig Posts: 212	Nighthawk Pro 280 Mar 30, 2018 13:24:29 GMT via mobile Quote Select Post Deselect Post Link to Post Back to Top Post by t2boats on Mar 30, 2018 13:24:29 GMT It wasn’t even £5 delivery, altogether was £21. All mine needs is just a 3S lipo and 6ch Radio year. Add the props and once things are set up it’ll be ready for testing how brave I am!

YooToo Premium Member Far too many ! Posts: 375	Nighthawk Pro 280 Mar 30, 2018 17:43:39 GMT t2boats likes this Quote Select Post Deselect Post Link to Post Back to Top Post by YooToo on Mar 30, 2018 17:43:39 GMT Thats a cracker that T2. I have just bought six Sunnysky 980's and Esc's to match plus four T Motors Navigator Series Mn 2206 for a 250 im making. J

YooToo Premium Member Far too many ! Posts: 375	Nighthawk Pro 280 Mar 30, 2018 18:05:44 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by YooToo on Mar 30, 2018 18:05:44 GMT Bloody hell...£19!!!! J

t2boats
Still learning

Craig

Posts: 212

Nighthawk Pro 280 Mar 30, 2018 22:45:32 GMT via mobile YooToo likes this

Quote

Post by t2boats on Mar 30, 2018 22:45:32 GMT

Nice one James! Yeah it’s unreal how cheap it was, had a discount at payment and it was just £17.10 in the end.....for something that retails over £180 in some shops! Going to have a meddle with the radio gear tomorrow and suss our which leads I’m to use.

Deleted Deleted Member Posts: 0	Nighthawk Pro 280 Apr 10, 2018 11:28:21 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by Deleted on Apr 10, 2018 11:28:21 GMT How you getting on with her matey?

YooToo Premium Member Far too many ! Posts: 375	Nighthawk Pro 280 Apr 10, 2018 17:14:53 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by YooToo on Apr 10, 2018 17:14:53 GMT Uber jealous of that bargain. J

t2boats
Still learning

Craig

Posts: 212

Nighthawk Pro 280 Apr 10, 2018 18:08:29 GMT Zannu likes this

Quote

Post by t2boats on Apr 10, 2018 18:08:29 GMT

errrr I'm not unfortunately... Been too busy with the kids over the Easter hols, I've come away to sea again now for a few weeks. So when I get home the house will be quiet as they'll be back in school. Got my TX & RX ready n sat there, was looking at the bag which came with the Nighthawk which contains an abundance of cables for the receiver - I've got a lot of head scratching to do figuring out which one does what. But leafing through the manual things seem fairly well laid out, so hopefully it won't be too bad. I've found a decent video on how to set it up anyway, but not a FlySky 6ch receiver. Hopefully there won't be any difference. Then figure out what switches do what on the controller!

YooToo Premium Member Far too many ! Posts: 375	Nighthawk Pro 280 Apr 10, 2018 18:47:50 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by YooToo on Apr 10, 2018 18:47:50 GMT Are you a quad virgin??? J

t2boats Still learning Craig Posts: 212	Nighthawk Pro 280 Apr 10, 2018 19:00:32 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by t2boats on Apr 10, 2018 19:00:32 GMT I certainly am! lol

Deleted
Deleted Member

Posts: 0

Nighthawk Pro 280 Apr 10, 2018 19:15:16 GMT t2boats likes this

Quote

Post by Deleted on Apr 10, 2018 19:15:16 GMT

Fair dos matey I had to set mine up on speccy which was a ballache tbf with end points etc f you get stuck head over to multirotor.co.uk great site really helpful guys over there mass knowledge on all quad gear brother

they helped me out loads when first starting up

www.multi-rotor.co.uk/index.php

t2boats Still learning Craig Posts: 212	Nighthawk Pro 280 Apr 10, 2018 19:18:43 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by t2boats on Apr 10, 2018 19:18:43 GMT That's great I'll take a look! Cheers bud

Zannu
The Boss

Finally home from uni, now to enjoy a great summer

Posts: 5,052

Nighthawk Pro 280 Apr 11, 2018 18:50:56 GMT

Quote

Post by Zannu on Apr 11, 2018 18:50:56 GMT

In the end I did not go for the 250 kit, it was tempting but right now I don't have the money. Fair enough not having time, when you do make sure to keep us updated, I really want to see what you make of it. Hope you are enjoying your holiday/being away.

I am a mad RC loving lawn mower racing lunatic with a desire for over-powered RC's.

t2boats
Still learning

Craig

Posts: 212

Nighthawk Pro 280 Apr 11, 2018 19:50:32 GMT

Quote

Post by t2boats on Apr 11, 2018 19:50:32 GMT

Apr 11, 2018 18:50:56 GMT Zannu said:

In the end I did not go for the 250 kit, it was tempting but right now I don't have the money. Fair enough not having time, when you do make sure to keep us updated, I really want to see what you make of it. Hope you are enjoying your holiday/being away.

I'm in work now matey

and now the wife's just taken ill

while I'm stuck away at sea... something always happens at home when I come away!

You'll get a kit soon enough Mat, I'm looking forward to seeing it fly for the first time. I'm pleased it came with all necessary electrics, just needs a TX and Rx, and lipo. So setup time should be minimal. I'll stick up an update when things happen in a few weeks.

Anything RC - UK

Announcements

Recent Threads

Post by t2boats on Mar 28, 2018 21:51:41 GMT

Post by Zannu on Mar 29, 2018 6:38:18 GMT

Post by t2boats on Mar 29, 2018 7:15:57 GMT

Post by DX4S on Mar 29, 2018 7:20:32 GMT

Post by t2boats on Mar 30, 2018 7:19:16 GMT

Post by DX4S on Mar 30, 2018 8:36:25 GMT

Post by Zannu on Mar 30, 2018 9:11:37 GMT

Post by t2boats on Mar 30, 2018 13:24:29 GMT

Post by YooToo on Mar 30, 2018 17:43:39 GMT

Post by YooToo on Mar 30, 2018 18:05:44 GMT

Post by t2boats on Mar 30, 2018 22:45:32 GMT

Post by Deleted on Apr 10, 2018 11:28:21 GMT

Post by YooToo on Apr 10, 2018 17:14:53 GMT

Post by t2boats on Apr 10, 2018 18:08:29 GMT

Post by YooToo on Apr 10, 2018 18:47:50 GMT

Post by t2boats on Apr 10, 2018 19:00:32 GMT

Post by Deleted on Apr 10, 2018 19:15:16 GMT

Post by t2boats on Apr 10, 2018 19:18:43 GMT

Post by Zannu on Apr 11, 2018 18:50:56 GMT

Post by t2boats on Apr 11, 2018 19:50:32 GMT